Professional aircond installation services in Kuala Lumpur & Selangor for all types of systems including wall-mounted, cassette, ducted, and VRV/VRF units. We ensure clean installation, proper piping, safe electrical setup, and energy-efficient cooling performance for long-lasting results.
✔ Transparent pricing & no hidden charges
✔ Skilled certified technicians
✔ Warranty included for peace of mind
✔ Same-day installation available in KL & Selangor
Many homeowners underestimate the importance of correct aircond installation in Kuala Lumpur (KL) & Petaling Jaya (PJ). Poor installation doesn’t just affect cooling — it can increase costs and damage your system long-term.
Choose the best location for airflow and minimal sun exposure. Measure room size to select the correct BTU capacity.
Pick energy-efficient units with high EER/SEER ratings. Inverter airconds are ideal for long-term savings.
Install indoor units 2–3 feet above floor level. Ensure proper outdoor unit placement with strong ventilation.
Use high-quality insulated piping and keep pipe length short to improve cooling efficiency.
Use a dedicated power supply with proper wiring and install surge protection for safety.
Test airflow and temperature. Set thermostat between 24–26°C for best energy savings.
Use smart thermostats, clean filters regularly, and schedule yearly servicing to maintain peak performance.
When it comes to aircon services Malaysia, we set the standard for excellence. With 15+ years of experience, we deliver unmatched quality, safety, and convenience. Here’s why homeowners and businesses choose us:
Licensed experts deal in any form of aircon installation- split systems to multi-units- to perform accurate residential/ commercial repair.
Up front pricing with no surprises. Affordable ac installation that does not pose a shock.
24/7 urgent repair service to the climate of Malaysia. Quick remedies to be comfortable at once.
You can rely upon authoritative services. Our engaged focus is on longevity, and to surpass attitudes of the client.
A twenty-four seven help in case of emergencies or fixing things or questions. Always reachable.
High-quality parts to perform the best. Fever break downs, long life of the system.
Get transparent aircon installation prices in Malaysia—starting from RM219 for wall-mounted units with no hidden fees!
|
Split-Type/Wall Mounted Unit
|
Price (RM)
|
|---|---|
|
1.0 HP
|
RM 220
|
|
1.5 HP
|
RM 250
|
|
2.0 HP
|
RM 280
|
|
2.5 HP
|
RM 310
|
|
3.0 HP
|
RM 340
|
|
4.0 HP
|
RM 380
|
|
5.0 HP
|
RM 440
|
|
Rate for Extra Copper Pipe
|
RM20/Feet
|
|
Ceilling/Cassette Unit
|
Price (RM)
|
|---|---|
|
1.0 HP
|
RM250
|
|
1.5 HP
|
RM280
|
|
2.0 HP
|
RM300
|
|
2.5 HP
|
RM320
|
|
3.0 HP
|
RM360
|
|
4.0 HP
|
RM400
|
|
5.0 HP
|
RM 500
|
|
Rate for Extra Copper Pipe
|
RM20/Feet
|
Poor installation can lead to:
– 30% higher electricity bills.
– Weak cooling even with a new Aircorn.
– Water leakage issues.
– Short compressor lifespan.
A properly installed Aircond can save 20–40% energy annually.
1- Split Aircorn Installation:
– Consists of an indoor unit + outdoor unit.
– Best for homes & bedrooms.
– Requires wall drilling & piping.
2- Window Aircorn Installation:
– Single unit.
– Easy installation.
– Less efficient but budget-friendly.
“Thermal Leakage Mapping”
technique, an advanced method used before Aircorn installation that involves:
The result is faster cooling and reduced electricity consumption.
– Monitor cooling speed.
– Check for unusual sounds.
– Set swing for full room coverage.
– Ideal temp: 24–26°C.
– This alone can cut the bill by 10–15%.
This alone can reduce bill by 10 to 15%.
Here’s a breakdown of the key points shown:
– Install the Aircorn away from the bed to avoid direct airflow.
– Position it so cold air doesn’t hit the face directly.
– Keep humidity balance in the room.
– Dry skin.
– Sinus issues.
– Headaches.
Step 1: Site Inspection & Planning involves three key actions before Aircorn installation in KL or Selangor:
– to determine the required Aircorn capacity suitable for local climate conditions.
– to ensure optimal airflow and efficiency, considering typical humidity in KL & Selangor.
– to confirm the structure can support the unit and has adequate electricity, complying with local regulations.
wrong planning leads to permanent cooling issues, meaning even a high-capacity Aircorn will fail if placement is incorrect.
The indoor unit is fixed on the wall.
1. Mounting plate is installed – securely attached to the wall to hold the Aircorn unit.
2. Unit is placed at proper height (usually 7–8 feet) – optimizes airflow and service access.
3. Proper distance from ceiling is maintained – ensures efficient cooling and ventilation.
✅ Avoid placing the Aircorn directly above a bed or heat sources to prevent uneven cooling and potential damage.
– A 2–3 inch hole is drilled through the wall to pass pipes and wires.
– The hole is made with a slight downward angle to ensure proper drainage.
Incorrect hole angle can cause a future water leakage problem.
1. Copper pipes are installed for refrigerant flow.
2. A drain pipe is connected for water removal.
3. Electrical wiring is set up to link the indoor and outdoor units.
🔥 90% of AC issues start from poor piping work.
✔️ Use high-quality copper and proper insulation for the piping.
A vacuum pump removes air & moisture from the system.
Gas pressure is checked.
A leakage test is performed.
Skipping the vacuuming process leads to weak cooling and higher electricity bills.
The outdoor unit is mounted on wall brackets or a floor stand.
It is positioned in an open airflow area outside the building.
Avoid placing the unit in direct sunlight and ensure airflow isn’t blocked.
1. Connect to main power.
2. Install a circuit breaker (MCB).
3. Ensure proper earthing.
voltage fluctuations are a major cause of AC damage.
Cooling performance
Airflow strength
Noise or vibration
Water drainage
✔️ Always run Aircorn for at least 15–20 minutes during testing.
Pipe insulation wrapping – insulate refrigerant pipes to prevent condensation & energy loss.
Sealing wall hole – close the opening made for piping with sealant or foam to stop air & moisture entry.
Cleaning installation area – remove debris, dust, and tools to leave the site tidy and safe.
Remote control functions – how to operate the device using its remote.
Ideal temperature settings (24–26°C) – recommended temperature range for optimal performance.
Basic maintenance tips – essential upkeep instructions.
🔥 Proper usage after installation matters as much as installation itself 👆—emphasizing that correct operation post-installation is crucial for performance and longevity.
– Wi-Fi enabled Aircorn units let homeowners control cooling remotely via apps.
– Integration with IoT devices (smart thermostats, sensors) optimizes energy use.
– Example: A smart-home system adjusts Aircorn cooling based on occupancy detected by motion sensors.
– New refrigerants like R-32 and R-290 replace R-410A because of their lower global warming potential.
– Highlight how KL & Selangor installers are adopting these greener refrigerant options.
– This positions the Aircorn installation service as future-proof and environmentally responsible.
Technicians should assess sun exposure, humidity, and airflow patterns in specific rooms for optimal installation. Placing units away from direct sunlight reduces strain and extends lifespan, especially in humid climates like Malaysia’s.
Modern ACs use inverter compressors and insulated piping to minimize noise. Proper installation ensures quiet operation, which is important for urban apartments.
Beyond the unit price, consider installation extras such as electrical rewiring, wall reinforcement for heavy units, and drainage system upgrades. Transparency about these costs builds trust with readers.
1. Refrigerant
– Traditional: R-410A.
– Modern: R-32, R-290 (eco-friendly).
2. Control
– Traditional: Manual remote.
– Modern: Smart app + IoT.
3. Placement
– Traditional: Standard wall mount.
– Modern: Microclimate-based.
4. Noise
– Traditional: Moderate.
– Modern: Low (inverter tech).
5. Cost Transparency
– Traditional: Basic unit + labor.
– Modern: Full breakdown incl. hidden costs.
1. Improper installation can cut efficiency by up to 30% and shorten the lifespan of the system.
2. Unlicensed technicians may use outdated refrigerants, which can lead to fines and environmental damage.
3. Hidden costs (like rewiring or piping) often surprise homeowners; your article should stress the importance of upfront disclosure of all potential expenses.
1. Basic Installation Price (Wall-Mounted Split Unit): RM 220 – RM 460
– 1.0 HP: RM 250-300
– 1.5 HP: RM 300-330
– 2.0 HP: RM 350-380
– 2.5 HP: RM 380-400
– 3.0 HP: RM 450-460+
2. Cassette/Ceiling Aircond Installation:
– 1.0-1.5 HP: RM 350-560
– 2.0-2.5 HP: RM 400-600
– 3.0 HP+: RM 600-800+
3. Full Cost (Aircond Unit + Installation): RM 1,700 – RM 2,500 average
– Non-Inverter: 1.0 HP (RM 1,100-1,500), 1.5 HP (RM 1,300-1,800)
– Inverter: 1.0 HP (RM 1,500-2,200), 1.5 HP (RM 1,800-2,600), 2.0 HP (RM 2,300-3,500)
– Copper piping: RM 15-45/ft
– Wall hacking: RM 100-200
– Electrical wiring: RM 100-300
– Optional charges like old AC dismantle (RM 80-150), gas top-up (RM 100-300)
– Total extras can add RM 200 – RM 1,000+
– Standard split AC: 2-4 hours
– Multiple units: 1 full day
– Cassette system: 4-6 hours
Ask about piping length, confirm gas charging/vacuum inclusion, avoid “too cheap” deals, get itemized quotations
– Trusted Services in KL:
Aircon Hero, Ac Cool N Cool, Aircond Doctor, FAST AIRCOND, MY AC COOL (same-day installation, warranty, certified technicians).
– Cheap installs may cause issues like gas leaks; proper installation saves long-term costs.
– Basic install: RM 220-460
– Average total setup: RM 1,700-2,500
– Premium: RM 3,000+
– Price depends on HP size, inverter type, piping length, complexity.
We provide expert aircon services throughout key regions in Malaysia. While these are our most frequently serviced areas, our coverage extends nationwide. Don’t see your location listed? Simply contact us – we’ll arrange service wherever you are.